- Once you finish your inspection after clicking “Accept” in the top right-hand corner of each Area Type you inspected you are ready to upload your data.
- On the location page where you choose the Building, Floor, Zone, Room, & Area Type you will select the green “Finalize” box in the upper right-hand corner.
- Then you will be prompted for your signature. You will simply use the pad of your finger and sign/initial to accept your inspection.
- Below the signature box you will select the green “Upload Inspection” button.
- There will then be a pop-up message confirming you are ready to upload. Select “Upload”.
- Then you will be brought back to the Smart Inspect Home Screen. At the top of the screen a quick green bar will appear stating that the inspection was successful.
- (NOTE: Once an inspection is sent you cannot edit or add to that inspection. The data has all been sent to the reporting website.)
How To Finalize/Upload Your Inspection in Smart Inspect Print
Modified on: Thu, 12 Sep, 2019 at 9:34 AM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.